SINGLE KNIFE STANDS
MCHS SINGLE KNIFE STANDS MCHS SIngle knife stand for fixed or folded blades. This stand was recently chosen by a major high end knife distributor to be used in their marketing campaigns. They choose the Black Cherry stain with a knotted & complex grain pattern by special request. The stand can be seen in the Main Photo for this series.
The single knife stand uses a L/R reverse back knife holder made of 3D printed plastic which comes pre-spaced at 3' apart with the knotched blade end (right facing) being 3/8" lower than the handle end. A nice complimentary display of your knife.
The stand comes with a 5 x 7 x .75" plaque available in a choice of two finishes. Black Cherry or "Old WOrld Classic", a custom Mahogany stain. Also included are Two - 2.5 x10mm black oxide, phillips head screws for mounting. Assembles in minutes. It's not for all of your knives, just your best!.
ADDITIONAL INFORMATION
A typical Knife stand consists of the 5 x 7 x .75", wood stand, or plaque. THE PLAQUES: The wood is a knotty pine variety that has many different grain patterns. I offer two colored stain finishes. 1) BLACK CHERRY. I try to use plaques that have little to none of the knots or grain patterns for this finish. But I do carry a small quantity in stock for repeat customers who prefer the OWC complex type grain pattern2) OWC (Old world Classic) The plaques with distinct knots & grain patterns are used for the OWC finish which is a custom finish of a Mahogany type that provides a more rustic pattern. Some of the OWC can have really rough, but beautiful faults that go well with the knife stands.Each plaque receives 2 coats of stain, 2 brushed on coats of polyurethane and a sprayed coat of polyurethane for long lasting protection.I order plaques online, and in bulk so I cannot guarantee the exact grain pattern your plaque may have. I use whatever is available at your time of order. If you have a specific requirement then message me BEFORE ordering. All of my wood base stands are handmade and therefore the final product will have variations in color or wood grain pattern which we are not responsible for. All products are inspected for best quality appearance before shipping to customer, All stands are pre-assembled for best fit before shipping. HARDWARE:KNIFE STANDS: Your stand assembly comes with one finished plaque with 4 felt feet for protection, a Single, double, or sheath stand depending on your order, Between two and five - 2.5 x 10mm black, Phillips-head mounting screws depending on which stand you ordered. The only tool required for assembly is a screwdriver for smaller screws. Knife Stands: The stands are made of 3D printed plastic filament either PLA or PETG. They will break if put under enough stress. They are spray painted with flat black primer paint. The stand consists of a right end and left end, connected by a 2mm wide connecting piece. You can remove this piece if you want. I thought it might be helpful to keep the 2 end pieces aligned while you choose a location. And it can be use to mark the screw holes. Your choice.Any helmets, nameplates, and/or Knives shown in the pictures ARE NOT INCLUDED. The name plate pictured is not included
