KNIFE & SHEATH STAND
MCHS SINGLE KNIFE w/ SHEATH STANDS
The single knife w/sheath stand uses the L/R reverse-back knife holder made of 3D printed plastic which comes pre-spaced at 3' apart with the knotched blade end (right facing) being 3/8" lower than the handle end. A nice complimentary display of your knife.
I noticed in looking at other knife stands that no one was selling a stand for displaying the Sheath with the knives! Being a bayonet collector I like to keep them together. I just happened to have some nice looking sheaths on some of my blades and voila! A product was born. The bottom level is for the knife which has all of the dimensions of the Single Knife Stand. The Top is a modified Double Stand where the Left and Right pieces were modified to accept the wider dimensions of a typical 9" fixed blade Knife sheath The blade angles downward while the sheath remains level. For those who don't want to split up a great team!
The stand comes with a 5 x 7 x .75" plaque available in a choice of two finishes. Black Cherry or "Old WOrld Classic", a custom Mahogany stain. Also included are Two - 2.5 x10mm black oxide, phillips head screws for mounting. Assembles in minutes. "They're not for all of your knives, just your best!"
PRODUCT INFO
A typical Knife stand consists of the 5 x 7 x .75", wood stand, or plaque.
THE PLAQUES: The wood is a knotty pine variety that has many different grain patterns. I offer two colored stain finishes.
1) BLACK CHERRY. I try to use plaques that have little to none of the knots or grain patterns for this finish. But I do carry a small quantity in stock for repeat customers who prefer the OWC complex type grain pattern
2) OWC (Old world Classic) The plaques with distinct knots & grain patterns are used for the OWC finish which is a custom finish of a Mahogany type that provides a more rustic pattern. Some of the OWC can have really rough, but beautiful faults that go well with the knife stands.
Each plaque receives 2 coats of stain, 2 brushed on coats of polyurethane and a sprayed coat of polyurethane for long lasting protection.
I order plaques online, and in bulk so I cannot guarantee the exact grain pattern your plaque may have. I use whatever is available at your time of order. If you have a specific requirement then message me BEFORE ordering.
All of my wood base stands are handmade and therefore the final product will have variations in color or wood grain pattern which we are not responsible for. All products are inspected for best quality appearance before shipping to customer, All stands are pre-assembled for best fit before shipping.
HARDWARE:
KNIFE STANDS: Your stand assembly comes with one finished plaque with 4 felt feet for protection, a Single, double, or sheath stand depending on your order, Between two and five - 2.5 x 10mm black, Phillips-head mounting screws depending on which stand you ordered. The only tool required for assembly is a screwdriver for smaller screws.
Knife Stands: The stands are made of 3D printed plastic filament either PLA or PETG. They will break if put under enough stress. They are spray painted with flat black primer paint.
The stand consists of a right end and left end, connected by a 2mm wide connecting piece. You can remove this piece if you want. I thought it might be helpful to keep the 2 end pieces aligned while you choose a location. And it can be use to mark the screw holes. Your choice.
Any helmets, nameplates, and/or Knives shown in the pictures ARE NOT INCLUDED. The name plate pictured is not included
RETURN AND REFUND POLICY
I’m a Return and Refund policy. I’m a great place to let your customers know what to do in case they are dissatisfied with their purchase. Having a straightforward refund or exchange policy is a great way to build trust and reassure your customers that they can buy with confidence.
